The Premium System.

Premium Posts with built in energiser

Premium Posts with built in energiser

Mix & Match - Premium and Profi Systems interlink.

Mix & Match – Premium and Profi Systems interlink.”

The Roflexs Premium system is the top of the range system The hollow metal posts have the electrical tape reels at the base, and the tapes run internally up the posts. Premium posts have a + section steel spike at their base together with a sturdy foot peg for inserting the posts into the ground. Premium posts are all fitted with 2 tapes, and each post can create a bay of fencing of up to 7.5m.

 

Post length and Tape dimensions.

Premium is available in three overall lengths (including the spike), 160cm,  145cm and 98 cm. With the 160 post the top tape height from ground level is 50 inches or 127cm,  with the 145post, the top tape height is 112cm or 44 inches, and with the 98 the top tape is 55cm or 22 inches.

 

Optional Built In Energiser.

The Powered Premium post comes with the optional energiser built into the top of a post, which provides electrical power to both tapes, and will electrify a string of posts. It comes complete with an external rechargeable battery that plugs into the side of the post, and is magnetically held in place. It comes with a 240volt charger. A powered post will energise a minimum of 10 posts, providing 60 hours of service, and has a 4 hour recharge cycle. The battery is rated for 1000 recharge cycles. The beauty of the Roflexs Powered post is its simplicity, you just plug in the battery, pull out the activation pin, and your fence is live. No wires to connect, or separate energisers to earth etc. (Not available on the 98)

 

Mix and Match.

All Roflexs electric fence systems are designed to interconnect with each other so you can mix your stock for different uses and still have them all work together.

 

Ease of use.

When erecting the fence you just clip  the buckles at the end of the  tapes to the previous post and walk away and watch the tapes  automatically extend. At 8m or the desired point place the post into the  ground and carry on with the next one. When dismantling you just pull the post out of the ground and walk towards the next post while the tapes automatically are recoiled by spring onto their reels.